Electrical check by PUE

Check your electrical work —
without being an electrician

Upload a plan, place points — GorkyCAD checks the project against 41 PUE/GOST/SP rules and shows errors before installation.

1

Upload a plan

A photo of the BTI plan or a DXF file — the system recognizes the walls.

2

Place points

Sockets, switches, lights — the interface suggests optimal positions by the rules.

3

Get a report

41 checks: cables, breakers, RCD, loads — in plain language.

What gets checked

Cable sizeIs the cable sufficient for the load — otherwise overheating and fire.
⚡ BreakersIs the breaker correctly selected for the group and cable.
🛡 RCD and wet zonesProtection for bathroom and kitchen — per PUE.
📉 Voltage dropDoes normal voltage reach the farthest sockets.
🔀 SelectivityWill a short circuit trip everything at once.
⚖️ Phase balanceIs the load evenly distributed across phases.
Upload a plan and check

Free for the first 3 projects · no installation, runs in the browser

Why it matters? Electrical mistakes don't show up immediately — they appear as cable overheating, nuisance breaker trips or, worst case, fire. GorkyCAD checks the project against PUE/GOST/SP rules while the error can still be fixed — before installation, not after.